|
Impact of 4G Wireless Link Configurations on VoIP
Network Performance.
Stefan Alfredsson,
Karlstad University,
Anna Brunström,
Karlstad University, and
Mikael Sternad,
Uppsala University.
IEEE International Symposium on Wireless
Communication Systems 2008, ISWCS2008,
October 21-24, Reykjavik, Iceland. © IEEE
- Abstract:
-
The performance of applications in wireless networks is partly
dependent upon the link configuration.
Link characteristics varies with frame retransmission
persistency, link frame retransmission delay,
adaptive modulation strategies, coding, and more.
The link configuration and channel conditions can
lead to packet loss, delay and delay variations, which
impact different applications in different ways.
A bulk transfer application may tolerate delays to a large
extent, while packet loss is undesirable. On the other hand,
real-time interactive applications are sensitive to delay
and delay variations, but may tolerate packet loss to a
certain extent.
This paper contributes a study of the effect of link frame
retransmission persistency and delay on packet loss and
latency for real-time interactive applications.
The results indicate that a reliable retransmission
mechanism with fast link retransmissions in the
range of 2-8 ms is sufficient to provide an upper
delay bound of 50 ms over the wireless link, which is
well within the delay budget of voice over IP applications.
- Related publications:
-
SoftCom07-paper, analysing link- and transport layer
performance interactions.
-
ISWCS06-paper describing the emulator methodology.
- Source:
-
Pdf; 100K.
|
Main
entry in list of publications
|
Wireless IP project
|
This material is posted here with permission of the IEEE.
Such permission of the IEEE does not in any
way imply IEEE endorsement of any of Uppsala University's
products or services.
Internal or personal use of this material is permitted.
However, permission to reprint/republish this material for
advertising or promotional purposes or for creating new collective
works for resale or redistribution must be obtained
from the IEEE by writing to [email protected].
By choosing to view this document, you agree to all
provisions of the copyright laws protecting it.
|
